beautypg.com

Rainbow Electronics MG260 User Manual

Page 193

background image

FLYFOT-MG260-MODULE

Page: 193 / 246

This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.

Defined values :

No parameter

18.25 FLYFOT Custom Character Set +WCCS

Description :

This specific command allows to edit and display the custom character set tables. These tables are used
by the “CUSTOM” mode of +CSCS and the +WPCS commands. In this CUSTOM mode, when the user
enters a string, it is converted into GSM alphabet using the Custom To GSM table. In a similar way, when
the user requests a string display, the string is converted from GSM alphabet using the GSM To Custom
table.

In edition mode, the session is terminated by , or aborted by . Only hexadecimal
characters (‘0’…’9’, ‘A’…’F’) can be used. The number of characters entered must be equal to the edition
range requested, otherwise the command will return “+CME ERROR: 3”.

Syntax :

Command syntax : AT+WCCS=,,[,]

Command

Possible responses

AT+WCCS=0,0,120,130

+WCCS: 11,

Note : Display from character 120 to

78797A2020202020097E05

character 130 of the Custom To GSM

OK

conversion table

Note : 11characters displayed

AT+WCCS=1,0,115

OK

20

Note : Edition successful

Note : Edit character 115 of the Custom To

GSM conversion table

AT+WCCS=1,1,0,4

OK

40A324A5E8

Note : Edition successful

Note : Edit the 5 first characters of the

GSM To Custom conversion table

AT+WCCS=1,1,200

+CME ERROR: 3

Note : Edit character 200 of GSM To

Note : Index out of range

Custom conversion table

See also other documents in the category Rainbow Electronics GPS receiver: