Rainbow Electronics MG260 - Manual (Page 153)

FLYFOT-MG260-MODULE
Page: 153 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
15.13 Echo E
Description :
This command is used to determine whether the modem echoes characters received by an external
application (DTE) or not.
Syntax :
Command syntax : ATE
Command
Possible responses
ATE0
Note : Characters are not echoed OK
Note : Done
ATE1
Note : Characters are echoed OK
Note : Done
Defined values :
0 : Characters are not echoed
1 : Characters are echoed
15.14 Restore factory settings &F
Description :
This command is used to restore the factory settings from EEPROM.
Syntax :
Command syntax : AT&F[
]
Command Possible responses
AT&F
Note : Ask for restoring the factory settings OK
Note : Done
AT&F0
Note : idem OK
Note : Done
Defined values :
0 : restore factory setting
No other value supported