Rainbow Electronics MG260 - Manual (Page 190)

FLYFOT-MG260-MODULE
Page: 190 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
AT+WSTR=? +WSTR: (1-2)
Note : Ask for the list of possible values
Note : possible values : 1 and 2
Defined values
1 : Initialisation sequence
0 : Not started
1 : On going
2 : Finished
2 : Network status
0 : No network
1 : Network available
18.21 FLYFOT Scan +WSCAN
Description :
This specific command displays the received signal strength indication ()
for a specified frequency (in absolute format).
This command is not allowed during communication.
Syntax :
Command syntax: AT+WSCAN=
Response syntax: +WSCAN:
Command Possible responses
AT+WSCAN=50
Note : Request of absolute frequency 50 +WSCAN: 23
OK
Note : is 23.
AT+WSCAN=1025
Note : Request power of absolute frequency 1025 CME ERROR: 3
Note : 1025 is not a valid absolute frequency
Defined values
: frequency in absolute format
0 : -113 dBm or less
1 : -111 dBm
2-30 : -109 to -53 dBm