Ohaus Voyager Balances - Manual (Page 97)

33
Place filling material on the balance pan, the display indicates on the bar
graph as a percentage and displays the actual load weight numerically.
Target and difference weights are also displayed.
MAIN MENU
CHANGE MODE
CHANGE MODE
FILLING
FILLING
TARGET
Enter
FILLING
6.2 Filling
Filling permits you to enter a target reference weight, then view other loads as a percentage of the reference which has
been set in the balance parameters. The load placed on the pan is displayed as a percentage of what was entered
into the balance. A twin bar display indicates to 89% on the first bar and to 110% on the second bar.
From main menu
Enter CHANGE MODE.
Select FILLING, display advances to TARGET.
Enter the target weight, up to 8 characters and press Enter button. The
display advances to FILLING with a dual bar display.
0.000
GRAMS STABLE
TARGET: DIFF:
After you have completed the filling procedure, you have choices at the
bottom of the display to either enter a new target value, change mode or
return to the main menu.
0% 90%
90% 110%
Balance modes