Ohaus Voyager Balances - Manual (Page 79)

15
3. The menu
3.1 What is the menu?
The menu allows you to match your balance to your specific weighing needs. In the menu, you can change the
settings of your balance and activate functions. The Main Menu contains 7 selections.
CHANGE MODE CHANGE UNITS SET BALANCE CUSTOM MENU LIBRARY CALIBRATION CONTRAST
Basic weighing
Parts counting
Filling
Animal weighing
Check weighing
Diff weighing
Formulation
Quick check
Statistics
Density
SQC
Pipette Milligrams
Grams
Kilograms
Pennyweight
Carats
Ounces
Troy ounces
Grains
Hong Kong taels
Singapore taels
ROC taels
Mommes
Pounds
Newtons
Ticals
Custom units
Exit to weigh Readout
Interface
Print option
Setup GLP
Set time/date
Autocal enable
Print current settings
Reset
Lockout
Software version
Exit to weigh Run
Setup custom menu
Exit to weigh Contains list of
stored setups Span
Linearity
User
Calibration test
Autocal
Autocal delta correction
Exit to weigh LCD contrast/
brightness adjust
1. Change mode: Permits setting the balance to one of 12 different operating modes.
2. Change units: Allows balance to measure in any of 15 selected measuring units and custom units.
3. Set balance:
Readout: Permits setting averaging level, stability level, auto zero and legal for trade.
Interface: Communication settings of baud, data, parity and stop bits can be set.
Print option: Includes auto print, stable & numeric data, date, time and reference.
Setup GLP: Project name, user name and GLP print options can be entered.
Set time/date: Allows balance to be set to current time and date with options on date types.
Autocal enable: Automatic calibration can be set to on or off (when balance is equipped with autocal).
Print current settings: When selected, current balance settings can be printed.
Reset:
Allows resetting of readouts, RS232, print option, GLP or all to factory defaults.
Lockout: Units, calibration and functions can be set to on or off.
Software version: Indicates software version installed in balance at time of manufacture.
4. Custom menu: Permits running a custom menu and setting up of a custom menu.
5. Library: Contains a list of stored setups which can be recalled for operating the balance.
6. Calibration: Span, linearity, user, calibration test, auto calibration can be selected to calibrate
the balance. Autocal delta correction permits user to adjust internal calibration
weight to match local standard.
7. Contrast: Allows LCD screen contrast to be set for best viewing conditions.
The menu