Ohaus Voyager Balances - Manual (Page 100)

36
CHANGE MODE
Enter
TARE SETUP
Enter
DIFF STARTUP
DIFF WEIGHING
DIFF WEIGHING SETUP
LIBRARY NAME
SETUP
RESUME
TARE SETUP offers a choice of NO TARE (no container is used), SINGLE
TARE (one container used during entire process), and DUAL TARE (two
containers used, one at the start of a process and a different container at the
end of a process). DUAL TARE is also used for sieve analysis. Select the
appropriate tare option for your process.
6.5 Differential weighing
Differential weighing stores tare and weight values so samples can be dried or processed and the difference in weight
calculated at a later time. Up to 80 samples can be stored. The balance has the capability to work with one or two
different containers or no container at all. A Sieve Analysis procedure is also included in Appendix A-1 for this type of
application. Samples can be added to the applications library or extracted by name using the previously stored data.
The balance can be used for other applications during processing time.
From main menu
Enter CHANGE MODE. Select DIFF WEIGHING, display advances to LIBRARY
NAME.
Library name
Enter a Library Name, up to 8 characters and press Enter button. Display
advances to DIFF STARTUP. If a previous name was entered and selected,
the balance displays the parameters which were set.
For first time entries, select SETUP. Display advances to DIFF WEIGHING
SETUP. RESUME will bring you directly to RUN which starts the program.
Do
not use RESUME initially.
Enter
DIFF WEIGHING SETUP
LIBRARY NAME
TARE SETUP
AUTO SAMPLEOFF
DIFF RESULT WEIGHT
NUMBER OF SAMPLES
VIEW RESULTS
CLEAR ALL DATA
RUN
Enter TARE SETUP.
NO TARE
SINGLE TARE
DUAL TARE
RETURN
TARE SETUP
NO TARE
SINGLE TARE
DUAL TARE
RETURN
Select RETURN. Display returns to DIFF WEIGHING SETUP.
Balance modes