Ohaus Voyager Balances - Manual (Page 155)

Ohaus Corporation, 19A Chapin Road, P.O. Box 2033, Pine Brook, NJ, 07058-2033 , USA
Declaration of Conformity We, Ohaus Corporation, declare under our sole responsibility that the balance models listed below
marked with “CE” - are in conformity with the directives and standards mentioned.
Balance model (s) Voyager
Marked with: EC Directive (Including applicable amendments) Standard
73/23/EC IEC 1010 -1:1990 + A1: 92 + A2: 95
Electrical equipment for use within specified voltage limits Safety requirements for Electrical Equipment for Measurement,
Control Laboratory Use, Part 1: General Requirements
89/336/EC EN61326: -1:1997 (class B) + A1: 1998
Electromagnetic compatibility EMC Emissions, residential, commercial and light industry.
EN61326: -1:1997 A1:1998 (industrial requirements)
EMC Immunity.
EN61000-3-2:1995 + A1:1998 + A2: 1998; EN61000-3-3:1995
EMC Part 3 (for equipment rated input current < or=16A)
Limits- Section 2: Limits for harmonic current emissions
Limits- section 3: Limitation of voltage fluctuations and flicker in low
voltage supply systems
Year of attach-
ment of the
CE mark: 96
EU 90/384 NAWI EN45501:1992 Non Automatic Weighing Instruments
ISO 9001 Registration for Ohaus Corporation. Ohaus Corporation, USA, was examined and evaluated in 1994 by the Bureau Veritas Quality
International, BVQI, and was awarded ISO 9001 registration. This certifies that Ohaus Corporation, USA, has a quality system that conforms with the
international standards for quality management and quality assurance (ISO 9000 series). Repeat audits are carried out by BVQI at intervals to check that the
quality system is operated in the proper manner.
Additional Standards
CAN/CSA-C22.2 No. 1010.1-92; UL Std. No. 3101-1
Safety requirements for Electrical Equip. for measurement, Control and Laboratory Use, Part 1; General Requirements
FCC, Part 15, class A Emission
AS/NZS4251.1 AS/NZS4252.1 Emission and Immunity
FCC
T2914
97
Ted Xia
President
Ohaus Corporation, Pine Brook, NJ USA n