Ohaus Voyager Balances - Manual (Page 27)

21
3.11 Formulation
The Voyager balance can store between 200 minimum and 500 formulations limited only by the memory capacity of
the resident library. Each formulation can be named and have up to 10 components specified and identified by name.
Once the formulations are stored in the balance library, they may be recalled and used at any time. Each component
of a given formulation can be specified as to its weight or percentage. The balance will display each element of a
formulation on a dual bar graph as a percentage and also displays the desired weight. Thus, each product may be
placed on the pan until 100% is indicated. Names are limited to 10 characters. The illustrations in this procedure are
samples for one formulation using a higher resolution balance.
Go Back
Help
Print Enter
MAIN MENU
CHANGE UNITS SET BALANCE
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE
Procedure
• Press arrow button to select MAIN MENU.
• Press Enter button.
• Using the arrow buttons, select CHANGE MODE.
• Press Enter button.
• Press or arrow button and select FORMU-
LATION.
• Press Enter button.
• Press or arrow button and select SETUP.
• Press Enter button, FORMULA SETUP is displayed.
• Press or arrow button and select LIBRARY
NAME.
• Press Enter button.
• Enter a library name for the 1st formula using the
arrow buttons.
• Press Enter button when name is completed, FOR-
MULA SETUP is displayed again.
• Press arrow button and select WEIGH TYPE.
• Press Enter button, a new screen with WEIGHT and
PERCENT is displayed. WEIGHT allows components
of the formula to be specified by weight. PERCENT
allows components to be specified by percentage.
FORMULATIONS BY WEIGHT
• Press or arrow button and select WEIGHT.
• Press Enter button.
• Using arrow button, scroll to ITEM NUMBER.
•Press Enter button. A new screen, SET ITEM
NUMBER appears.
• Press or arrow button and enter the num-
ber of components in the formula.
• Press Enter button, FORMULA SETUP is displayed.
• Press or arrow button and select SETUP.
• Press Enter button, NAME menu is displayed with the
number of items you entered for the first formula.
• Press or arrow button and select item 1.
• Press Enter button, COMPONENT NAME display
appears.
• Using arrow buttons, enter the component name for
item 1 in the formula.
R
0.00
WEIGHT
0% 100%
GRAMS STABLE
MOVE HIGHLIGHT MAIN MENU CONTRAST
MAIN MENU
CHANGE UNITS SET BALANCE
RETURN TO
WEIGH
CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILLING
ANIMAL WEIGHING
CHECK WEIGHING
DIFFERENTIAL WEIGHING
FORMULATION
QUICK CHECK
STATISTIC
DENSITY
MAIN MENU
CHANGE UNITS SET BALANCE
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILL
ANIMAL WEIGHING
CHECK WEIGHING
DIFFERENTIAL WEIGHING
FORMULATION
QUICK CHECK
STATISTICS
DENSITY
FORMULATION
SETUP
RECALL
RESUME
EXIT TO WEIGH
MAIN MENU
CHANGE UNITS SET BALANCE
RETURN TO
WEIGH
CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILL
ANIMAL WEIGHING
CHECK WEIGHING
DIFFERENTIAL WEIGHING
FORMULATE
QUICK CHECK
STATISTIC
DENSITY
FORMULATION
SETUP
RECALL
R
EXIT TO WEIGH
FORMULA SETUP
LIBRARY NAME
WEIGH TYPE WEIGHT
SET REFERENCE
NUMBER OF ITEMS 0
SETUP
SAVE TO LIBRARY
RUN
EXIT TO WEIGH
MAIN MENU
CHANGE UNITS SET BALANCE
RETURN TO
WEIGH
CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILL
ANIMAL WEIGHING
CHECK WEIGHING
DIFFERENTIAL WEIGHING
FORMULATE
QUICK CHECK
STATISTIC
DENSITY
FORMULATION
SETUP
RECALL
R
EXIT TO WEIGH
FORMULA SETUP
LIBRARYNAME
WEIGH TYPE
SET REFERENCE
NUMEM NAUMBERS 0
SETUP
SAVE TO LIBRARY
RUN
EXIT TO WEIGH
LIBRARY NAME
/ TO SCROLL CHARACTERS
/ TO MOVE CURSOR
TO ACCEPT
TO ABORT
FORMULA 1
MAIN MENU
CHANGE UNITS SET BALANCE
RETURN TO
WEIGH
CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILL
ANIMAL WEIGHING
CHECK WEIGHING
DIFFERENTIAL WEIGHING
FORMULATE
QUICK CHECK
STATISTIC
DENSITY
FORMULATION
SETUP
R
RECALL
EXIT TO WEIGH
FORMULA SETUP
LIBRARY NAME
WEIGH TYPE WEIGHT
SET REFERENCE
NUMBER OF ITEMS 0
SETUP
SAVE TO LIBRARY
RUN
EXIT TO WEIGH MAIN MENU
CHANGE UNITS SET BALANCE
RETURN TO
WEIGH
CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILL
ANIMAL WEIGHING
CHECK WEIGHING
DIFFERENTIAL WEIGHING
FORMULATE
QUICK CHECK
STATISTIC
DENSITY
FORMULATION
SETUP
R
RECALL
EXIT TO WEIGH
FORMULA SETUP
LIBRARY NAME
WEIGH TYPE WEIGHT
SET REFERENCE
NUMBER 0
SETUP
SAVE TO LIBRARY
RUN
EXIT TO WEIGH
SELECT WEIGH TYPE
WEIGHT
PERCENT