Ohaus Voyager Balances - Manual (Page 283)

42
Balance modes
Enter
Enter
FORMULATION SETUP
200.044
FORMULATION
0% 90%
90% 110%
A1=200.000 DIFF WT: 0.044
GRAMS STABLE
PRESS FOR MENU
Al 200.000 200.044 0.044
A2 200.000 200.021 0.021
TOTAL 400.000 400.065 0.065
TARGET RESULT DIFF
Final results
After the last component is placed on the pan, the final result is indicated on
the display.
FORMULATION SETUP
LIBRARY NAME FORM2
WEIGH TYPE WEIGHT
NUMBER OF ITEMS
SETUP
RUN
Enter SETUP in the FORMULATION SETUP. Display advances to a split screen.
Specifying component names
Specify the name for the first component of the formula, then press Enter
button. Display advances to right of screen which is either weight or percent-
age (whichever was previously selected).
FORMULATION SETUP
1 0.000
2
Specifying weight or percentage values
Specify either weight value or percentage value which you had previously
selected for the first component. Repeat these two steps for all components
in your formula. After you enter all component names and values, the
display advances to FORMULATION SETUP with RUN highlighted.
FORMULATION SETUP
LIBRARY NAME FORM2
WEIGH TYPE WEIGHT
NUMBER OF ITEMS
SETUP
RUN
Select RUN. A dual bar display appears indicating the weight or percentage
to be placed on the pan.
Adding first component
Add the first component on the pan. The bar graph is used as a guide to
precisely add 100% of the first component. NEXT appears highlighted at the
bottom of the display. Press Enter button to add next component. Sample
indicates 200.044 grams. Leave the first component on the pan. Repeat this
procedure for all additional components.
Enter
FORMULATION
90% 110%
A1=200.000 DIFF WT: 0.021
GRAMS STABLE
200.021
Adding remaining components
Add all remaining components one at a time, pressing the Enter button after
each component is placed on the pan.
Enter
1 0.000
2 0.000