Ohaus Voyager Balances - Manual (Page 9)

3
2.2 Selecting the Location
The balance should always be used in an environment which is free from excessive air currents, corrosives, vibration,
and temperature or humidity extremes. These factors will affect displayed weight readings.
2.3 Setting Up and Leveling the Balance
Exact horizontal positioning and stable installation are prerequisites for repeatable results. To compensate small
irregularites or inclinations at the location, the instrument can be leveled.
For exact horizontal positioning, the balance is equipped
with a level indicator located at the front on the control
panel and two leveling feet located at the rear of the
balance.
Position the balance in the intended operating location.
Adjust the leveling feet at the rear of the balance until the
air bubble in the indicator is centered.
NOTE: The instrument should be leveled each time its
location is changed.
Leveling
Indicator
Leveling
Foot
>O/T<
>O/T< 0.000
WEIGHT
0%
100%
CONTRAST
GRAMS
STABLE
MOVE HIGHLIGHT
CONTRAST
MAIN MENU
Enter
Go Back
Help Print
OHAUS ®
>O/T< >O/T<
>O/T< >O/T< 0.00
W EIG HT 0%
100% CO NTRAST
GRAM S STABLE
MO VE HIG HLIG HT
CO NTRAST
MAIN M ENU Enter
Go Back Heip Print
OHAUS ®
DO NOT install the balance:
•
Next to open windows or doors causing drafts or
rapid temperature changes.
•
Near air conditioning or heat vents.
•
Near vibrating, rotating or reciprocating equipment.
•
Near magnetic fields or equipment that generates
magnetic fields.
•
On an unlevel work surface.
•
Allow sufficient space around the instrument for
ease of operation and keep away from radiating heat
sources.
>O/T< >O/T<
>O/T< >O/T< 0.00
WEIGHT 0%
100% CONTRAST
GRAMS STABLE
MOVE HIGHLIGHT CONTRAST
MAIN MENU Enter
Go Back Heip Print
OHAUS ®
>O/T<
>O/T< 0.00
W EIGHT 0%
100% CONTRAST
GRAMS STABLE
MOVE HIGHLIGHT CONTRAST
MAIN M ENU Enter
Go Back Heip Print
OHAUS ®