Ohaus Voyager Balances - Manual (Page 95)

31
6. Balance modes
Your balance has 11 additional modes of operation in addition to basic weighing. These built-in modes expand the
possibilities of your balance and facilitate your daily work. The following sections will acquaint you with these
modes.
6.1 Parts counting
Your balance can be set to either Easy Count or Advanced Count parts method.
6.1.1 Easy count
Easy count is a simplified method for counting parts. After specifying a sample size, the balance will display the
actual number of samples placed on the pan. Accuracy is based on the average piece weight (APW) of a single
part. All parts must be reasonably uniform in weight.
From main menu
Enter CHANGE MODE, scroll to PARTS COUNTING and select EASY PARTS
COUNTING.
Enter
CHANGE MODE
EASY PARTS COUNTING
PARTS COUNTING
SAMPLE SIZE
10
PIECES STABLE
PARTS COUNTING
Enter numeric sample size and press Enter button.
APW 0.3898 WEIGHT: 3.900
SIZE 10
Place specified number of samples on the pan. After a few seconds, the
display indicates the number of pieces based on the sample size. Repeated
batches of samples may be placed on the pan and counted.
Balance modes