Ohaus Voyager Balances - Manual (Page 91)

27
5.2 Taring the balance
The weight of any container can be tared by the press of a button. The taring range covers the entire weighing range
of your balance.
To tare a container, place it on the weighing pan.
Close all draft shield doors (if draft shield is used).
Press the >O/T< button to start the taring operation.
You cannot tare the balance when the weighing pan is unstable. On
completion of taring, the word STABLE appears in the lower right hand
portion of the display and the numerical display indicates zero.
->O/T<-
0.000
GRAMS STABLE
BASIC WEIGHING
Remember, when taring a container, the weight of the container is subtracted
from the total capacity of the balance.
5.3 Performing a simple weighing
The balance always starts in a weighing mode when first turned on.
After taring the balance, place sample on the pan. Wait until display indi-
cates STABLE. Now read the weight in the display.
If the balance is in another mode, press the Go Back button repeatedly to get
back to the weighing mode.
Weighing made simple