Ohaus Voyager Balances - Manual (Page 313)

72
Balance settings
7.14 Menu lockout protection
Access to the various menus can be disabled by setting the Lock switch located on the PC board inside the
balance to ON position. The Lock switch locks out certain menus when Legal For Trade is turned ON. The default
setting for the Lock switch is OFF.
Type Approved/Legal for Trade Balance Sealing
All Voyager balances may be sealed for type approved/legal for trade applications. Type Approved balances include a
lead seal with wire and security screw as shown in the illustration.
For type approved balances consult local Weights and Measures officials to determine sealing method require-
ments.
After the balance has been set up properly and LFT is set ON, proceed to sealing the balance.
Sealing the balance
— Turn the display off and unplug the power cord.
— On balances with a draft shield, slide the door open and remove the pan and cover plate.
Higher capacity balances with a 6" or 8" pan do not have a cover plate.
— On balances without a draft shield, remove the pan and cover plate.
— Remove the protective cover seal.
— The Lock switch is located to the left of the pan support hole.
— Select the desired position on the Lock switch, seal and reassemble the balance.
>O/T<
>O/T<
Ente r
Go B ack Help
Prin t
OHA US ¨
0.000
BA SIC W EIG HIN G
0%
10 0% GR AM S
STA BLE
PR ES S
NTE R> F OR M EN U
On /O ff
Cover Seal
Lead Seal
Example of Sealing Method
Sealing Screw
Lock Switch shown in Locked Position
Pan
Cover Plate