Ohaus Voyager Balances - Manual (Page 18)

12
Go Back
Help
Print Enter
3.4 Setting Measuring Unit
Before using the balance for the first time, the desired measuring unit should be set first. The following measuring
units are available: MILLIGRAMS, GRAMS, KILOGRAMS, PENNY WEIGHTS, CARATS, OUNCES, TROY OUNCES,
GRAINS, HONG KONG TAELS, SINGAPORE TAELS, ROC TAELS, POUNDS, NEWTONS, TICALS and CUSTOM
UNITS.
0.00
WEIGHT
0% 100%
GRAMS STABLE
MOVE HIGHLIGHT MAIN MENU CONTRAST
Go Back
Help
Print Enter
MAIN MENU
SET BALANCE
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS
MAIN MENU
SET BALANCE
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS
CHANGE UNITS
MILLIGRAMS
GRAMS
KILOGRAMS
PENNY WEIGHTS
CARATS
OUNCES
TROY OUNCES
GRAINS
HONG KONG TAELS
SINGAPORE TAELS
EIGH
Procedure
To select a measuring unit, proceed as follows:
• Press arrow button to select MAIN MENU.
• Press Enter button.
• Using the arrow buttons, select CHANGE UNITS.
• Press Enter button.
• Press or arrow button and select the
desired measuring unit. (Grams is shown).
• Press Enter button to save setting. The balance will
now weigh in the selected measuring unit.
NOTE: Depending upon the balance model/capacity,
some measuring units may not be available when
selected.
When CUSTOM UNITS is selected, up to three differ-
ent entries may be made. You would select SETUP
and follow the prompts and enter UNIT NAME, SET
MANTISSA, SELECT DP, SELECT LSD and then
SAVE & EXIT.
0.00
WEIGHT
0% 100%
CONTRAST
GRAMS STABLE
MOVE HIGHLIGHT CONTRAST MAIN MENU
MAIN MENU
SET BALANCE
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS
CHANGE UNITS
GRAINS
HONG KONG TAELS
SINGAPORE TAELS
ROC TAELS
MOMMES
POUNDS
NEWTONS
TICALS
CUSTOM UNITS
EXIT TO WEIGH