Ohaus Voyager Balances - Manual (Page 49)

43
4.8 Reset
When this function is selected, and the Enter button is pressed, settings which were made in Readouts, RS232, Print
Option and GLP Print Option can be reset to factory settings.
Go Back
Help
Print Enter
0.00
WEIGHT
0% 100%
GRAMS STABLE
MOVE HIGHLIGHT MAIN MENU CONTRAST
MAIN MENU
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS SET BALANCE
Go Back
Help
Print Enter
0.00
WEIGHT
0% 100%
GRAMS STABLE
MOVE HIGHLIGHT MAIN MENU CONTRAST
Procedure
• Press arrow button to select MAIN MENU.
• Press Enter button.
• Using the arrow buttons, select SET BALANCE.
• Press Enter button.
• Press or arrow button and select RESET.
• Press Enter button, RESET TO FACTORY SETTING
is displayed.
• Press arrow button and select either RESET
READOUTS, RESET RS232, RESET PRINT OP-
TION, or RESET GLP PRINT OPTION. Selecting
any of these items will reset that function to the
factory setting.
• Press Enter button, display returns to SETUP
BALANCE.
• Press arrow button and select EXIT TO WEIGH.
• Press Enter button, display returns to WEIGH. MAIN MENU
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS SET BALANCE
SETUP BALANCE
READOUT
INTERFACE
PRINT OPTION
SETUP GLP
SET TIME/DATE
AUTOCAL ENABLE
PRINT CURRENT SETTINGS
RESET
LOCK OUT
SOFTWARE VERSION
MAIN MENU
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS SET BALANCE
SETUP BALANCE
READOUT
INTERFACE
PRINT OPTION
SETUP GLP
SET TIME/DATE
AUTOCAL
PRINT CURRENT SETTINGS
RESET
LOCK OUT
SOFTWARE VERSION
RESET TO FACTORY SETTING
RESET READOUTS
RESET RS232
RESET PRINT OPTION
RESET GLP PRINT OPTION
EXIT TO WEIGH