Ohaus Voyager Balances - Manual (Page 75)

11
2. Installation
In this section, you will learn how you unpack and install your new balance and prepare it for operation. On comple-
tion of the steps described in this section, your balance is ready for operation.
2.1 Unpacking and checking the standard equipment
Open the package and remove the instrument and the accessories. Check the completeness of the delivery.
The following accessories are part of the standard equipment of your new Voyager balance.
4100g, 6100g and 8100g balances with internal calibration are equipped with 6” Pan and Windshield.
Remove packing material from the instrument.
Check the instrument for transport damage. Immediately inform your Ohaus dealer if you have complaints or parts
are missing.
Store all parts of the packaging. This packaging guarantees the best possible protection for the transport of your
instrument.
Analytical Capacity
Equipment 62g, 110g, 210, 410, 610g - 4100g 6100g -8100g
210g 210/100g 410/100g 4100/1000g
Pan 3.5” •
Pan 4.75” •
Pan 6” (0.01g units) •
Pan 8” (0.1g units) • •
Draft Shield • •
Wind Shield (6" Pan Units, 0.01g) •
AC Power Adapter • • • •
Instruction Manual • • • •
Warranty Card • • • •
Installation