Ohaus Voyager Balances - Manual (Page 20)

14
3.6 Parts Counting
The Voyager balance can be set to either an Easy Count or Advanced Count parts counting method.
Easy Count setting enables a simplified method for counting parts. When selected, Easy Count displays a screen
which requires that the number of sample parts be entered. After this entry, putting a quantity of samples on the pan,
the balance will display the actual number of samples. Since the balance determines the quantity based on the
average weight of a single part, all parts must be reasonably uniform in weight.
Advanced Count setting contains a number of entry screens which include assigning a library name, filling and
sorting applications and statisical information which can be printed.
3.6.1 Easy Count
Go Back
Help
Print Enter
Procedure
• Press arrow button to select MAIN MENU.
• Press Enter button.
• Using the arrow buttons, select CHANGE MODE.
• Press Enter button.
• Press or arrow button and select PARTS
COUNTING.
• Press Enter button.
• Press or arrow button and select EASY
COUNT.
• Press Enter button.
• Enter the numeric sample size as indicated on the
screen using the arrow buttons to set the value.
• Press Enter button.
• Place sample size on pan and press Enter button.
• Remove samples from pan and place samples to be
measured on the pan. The display indicates the num-
ber of pieces based on the sample size. Repeated
batches of samples may be placed on the pan and
counted. Sample shown below indicates 10 pieces.
MAIN MENU
CHANGE UNITS SET BALANCE
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE
0.00
WEIGHT
0% 100%
GRAMS STABLE
MOVE HIGHLIGHT MAIN MENU CONTRAST
MAIN MENU
CHANGE UNITSPART S ET BALANCE
RETURN TO
WEIGH
CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILLING
ANIMAL WEIGHING
CHECK WEIGHING
DIFF WEIGHING
FORMULATION
QUICK CHECK
STATISTICS
DENSITY
MAIN MENU
CHANGE UNITSPART S ET BALANCE
RETURN TO
WEIGH
CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILLING
ANIMAL WEIGHING
CHECK WEIGHING
DIFF WEIGHING
FORMULATION
QUICK CHECK
STATISTICS
DENSITY
PARTS COUNTING
EASY COUNT
ADVANCED COUNT
RECALL
EXIT TO WEIGH
EASY COUNT
0% 100%
PIECES UNSTABLE
OPTIMIZE MAIN
A.P.W. =
SIZE =
TARE WT =
WEIGHT =
CONTRAST NEW
ENTER SAMPLE SIZE
10
/ TO SCROLL CHARACTERS
/ TO MOVE CURSOR
TO ACCEPT
TO ABORT
EASY COUNT
0% 100%
PIECES UNSTABLE
OPTIMIZE MAIN
A.P.W. =
SIZE =
TARE WT =
WEIGHT =
CONTRAST NEW
SET A.P.W.
PLEASE PUT:
10 SAMPLES
AND PRESS < ENTER > . . .
EASY COUNT
0% 100%
PIECES UNSTABLE
OPTIMIZE MAIN
A.P.W. = 30.00
SIZE = 10
TARE WT = 0.00
WEIGHT = 300.02
CONTRAST NEW
10