Enter total sample weight, Enter number of samples, Specify the number of samples – Ohaus Voyager Balances User Manual
Page 148: Initial weighing of sieves, Enter, Enter appendix a - special applications
84
Enter total sample weight
Enter the total sample weight. This is the weight of the actual sample. Press
Enter button. Display advances to RETURN.
ENTER TOTAL SAMPLE WEIGHT
200.025
Enter
DIFF RESULT
WEIGHT
PERCENT
% RETENSION <-SELECTED
RETURN
With RETURN highlighted, press the Enter button.
Enter
DIFF WEIGHING SETUP
LIBRARY NAME
DIFF4
TARE SETUP
NO TARE
AUTO SAMPLE
OFF
DIFF RESULT
% RETENSION
NUMBER OF SAMPLES
1
VIEW RESULTS
CLEAR ALL DATA
RUN
Enter number of samples
Enter the number of samples, press the Enter button.,
NUMBER OF SAMPLES
Specify the number of samples
Specify the number of samples and press Enter button. Display advances to
DIFF WEIGHING SETUP with RUN highlighted.
3
Enter
DIFF WEIGHING SETUP
LIBRARY NAME
SIEVE 2
TARE SETUP
OFF
AUTO SAMPLE
ON
DIFF RESULT
% RETENTION
NUMBER OF SAMPLES
3
VIEW RESULTS
CLEAR ALL DATA
RUN
3.426
DIFF WEIGHING
TARE WT:
TARE WT:3.426
IN IT WT:
FINAL WT:
PUT EMPTY SIEVE # 1 ON PAN STABLE
START/SAMPLE EDIT SETUP
Initial weighing of sieves
Press the Enter button, the display indicates to PUT EMPTY SIEVE #1 ON
PAN.
Place empty sieve #1 on the pan and press Enter button. When AUTO
SAMPLE is set ON, display advances to the next sieve. Continue adding
sieves until all sieves have been weighed pressing the Enter button after
each sieve. When the last sieve has been weighed, the display indicates the
tare weight of all sieves. Press the Enter button.
This sample display indicates 3 sieves were weighed. With CONTINUE
highlighted at the bottom of the display, press Enter button. The display
advances and indicates PUT FULL SIEVE #1 ON PAN.
N/A
NA
3.426 0.000
N/A
N/A
3.969 0.000
N/A
N/A
3.962 0.000
CONTINUE SAVE RESAMPLE DELETE
TAREWT INIT WT TARE WT FINAL \VT
SAMPLE #1
Enter
Appendix A - special applications