Ohaus Voyager Balances - Manual (Page 260)

19
Calibration
Calibration Menu Protection
Calibration may be locked out to prevent unauthorized personnel from
changing calibration under LFT (Legal for Trade) mode. If calibration has
been locked out, you can only access Internal Weight Calibration and
Calibration Test.
To lock out calibration menu, after calibration, refer to paragraph 7.14
titled Menu Lock-Out Protection.
Linearity, Span and User calibration are disabled for Type Approved/LFT
balances.
Calibration Masses
Before beginning calibration, make sure masses are available. If you begin
calibration and realize calibration masses are not available, exit the menu.
The balance will retain previously stored calibration data. Calibration should
be performed as necessary to ensure accurate weighing. Masses required to
perform the procedures are listed in the following table.
CALIBRATION MASSES
LINEARITY SPAN ONLY
CAPACITY CAL POINT CAL POINT
62g 20g/50g 50g
110g 50g/100g 100g
210g 100g/200g 200g
410g 200g/400g 400g
610g 200g/500g 500g
2100g 1000g/2000g 2000g
4100g 2000g/4000g 4000g
6100g 2000g/5000g 5000g
8100g 4000g/8000g 8000g
Masses must meet or exceed ASTM Class 1 Tolerance.
Calibration masses are available as accessories.