Ohaus Voyager Balances - Manual (Page 38)

32
3.16 Printing Data
Printing data to an external computer or printer requires that the communications parameters be set first. Refer to
Section 4, Setting up Your Balance.
Procedure
• Press the Print button. Printing to an external printer
or computer will occur each time the Print button is
pressed unless autoprint feature is turned on in which
case printing can occur in a continuous fashion at
specified intervals or each time a stable reading is
achieved.
• This section defines the various printing setups with
printing samples.
Time and Date
When time and date are entered in the balance with both
Time and Date options set to ON, each printout starts
with the date and time on the first line.
Go Back
Help
Print Enter
0.00
WEIGHT
0% 100%
GRAMS STABLE
MOVE HIGHLIGHT MAIN MENU CONTRAST
TYPE= MM/DD/YY
TYPE= 24 HOUR
12/17/96 16:26:12
READOUT
STABILITY LEVEL FILTER = 0.5d
AVERAGING LEVEL FILTER = 1
AZT LEVEL = 0.5d
GLP PRINT OPTIONS
DATE & TIME = OFF
BALANCE ID = OFF
PROJECT NAME = OFF
USER NAME = OFF
DIFFERENCE = OFF
PRINT OPTION
AUTO PRINT = OFF
INTERVAL= 0
STABLE PRINT = OFF
NUMERIC DATA = OFF
DATE= OFF
TIME= OFF
PRINT REFERENCE = OFF
RS232 = 2400: NONE: 7 : 2
SAMPLE PRINTOUTS
The sample shown, indicates the status in the menus.