Ohaus Voyager Balances - Manual (Page 170)

17
The menu
How to save your settings and quit the menu
Certain menu options have ON and OFF settings. In these options, pressing
the Enter button saves the setting after you make a selection.
In options which offer various settings, after you have selected a setting,
press the Enter button. SAVING is momentarily displayed and the display
returns to the same option.
Enter MAIN MENU
SAVING
How to back out of a menu
You can back out of a menu and return to the weighing mode at any time
with the Go Back button. Use the Go Back button to cancel a number,
alphanumeric entry or to leave a mode.
0.000
GRAMS STABLE
BASIC WEIGHING Go Back
3.3 Library
Approximately 200 names can be stored in the library. Eight functions in the balance have provisions for storing a
library name, they are: Advanced Counting, Check Weighing, Statistics, Differential Weighing, Formulation, Density,
SQC and Pipette. When a library name is selected, the associated function is also displayed. A Library menu is
provided which allows the selected library name and function to be run, deleted or delete all entries. If you have
accessed the library and do not want to run or delete a name, an exit to weighing selection can be made by pressing
the Go Back button which does not affect the library
MAIN MENU
CHANGE MODE
CHANGE UNITS
SET BALANCE
CUSTOM MENU
LIBRARY
CALIBRATION
CONTRAST
From main menu
Select LIBRARY, then press the Enter button. Display advances to
LIBRARY % USED menu indicating all previously entered names, their
corresponding functions and the percentage of the library which has
been used.
The sample shown indicates six library entries. Entries are stored in alpha-
betical order.
LIBRARY 15.21% USED
P1 PIP 1.26%
P2 PIP 1.26%
SQ1 SQC 3.17%
SQ2 SQC 3.17%
SQ3 SQC 3.17%
SQ5 SQC 3.17%
Accessing library function
Select LIBRARY function and press the Enter button. Display advances to
LIBRARY menu with RUN, DELETE and DELETE ALL options shown.
LIBRARY
RUN
DELETE
DELETE ALL
Select either RUN, DELETE, or DELETE ALL. When RUN is selected, that
particular balance operation is enabled and can be run. When a particular
name is selected and the DELETE selection is made, that particular name
and function with all parameters is removed from the library. DELETE ALL,
when selected, removes the entire contents of the library.
or