Ohaus Voyager Balances - Manual (Page 105)

41
CHANGE MODE
FORMULATION SETUP
FORMULATION
FORMULATION SETUP
LIBRARY NAME
From main menu
Enter CHANGE MODE. Select FORMULATION, display advances to LIBRARY
NAME.
Library name
Enter a library name, up to 8 characters and press Enter button. Display
advances to FORMULATION SETUP with WEIGH TYPE highlighted. If a
previous name was entered and selected, the balance displays the param-
eters which were set.
Enter
WEIGH TYPE
WEIGHT
PERCENT
RETURN
Specify the number of items (components) in the formulation. After specify-
ing the number of items, the display returns to FORMULATION SETUP with
SETUP highlighted.
6.6 Formulation
Formulations can be named and have from 2 to 10 components specified. Names are limited to 8 characters. Once
named, they may be recalled and used at any time. Each component of a given formulation can be specified as to
its weight or percentage. Each element of a formulation is shown on a dual bar graph as a percentage and displays
the desired weight. Thus, each component may be placed on the pan until 100% is indicated.
Weigh type
Enter the weigh type. You can select the components to be specified by
weight or percentage. Display returns to FORMULATION SETUP.
FORMULATION SETUP
LIBRARY NAME FORM2
WEIGH TYPE WEIGHT
NUMBER OF ITEMS
SETUP
RUN
Number of items
Select NUMBER OF ITEMS.
LIBRARY NAME FORM 2
WEIGH TYPE WEIGHT
NUMBER OF ITEMS
SETUP
RUN
FORMULATION SETUP
NUMBER OF ITEMS
Enter
Balance modes