Ohaus Voyager Balances - Manual (Page 221)

68
Balance settings
SETUP DATE/TIME
SET TIME 11:23:21AM
Enter
Select either ON or OFF and press the Enter button. The display returns to
AUTOCAL ENABLE.
AUTOCAL ENABLE
ON
OFF
SETUP DATE/TIME
AM
PM
Setting am/pm
Select AM or PM as required. The display returns to the DATE TYPE. Press the
Go Back button to return to SET BALANCE menu, SET TIME/DATE is
displayed.
SETUP DATE/TIME
SET TIME
Setting the time
Enter the time in the format you have chosen above. After entering the time,
the display advances to SELECT AM/PM display only if 12 hour time type
was selected.
Enter
Enter set time
Enter the SET TIME option. The previously entered time appears in the
display. Press the Enter button.
or
From main menu
Select SET BALANCE and press the Enter button. Display advances to SET
BALANCE with READOUT highlighted. Scroll to AUTOCAL ENABLE and press
the Enter button.
SET BALANCE
AUTOCAL ENABLE
or
7.8 Setting auto calibration
Automatic calibration of the balance can be accomplished when equipped with this option. When this function is
turned ON, the balance automatically calibrates itself due to a temperature change.
Enter
From main menu
Enter SET BALANCE and select PRINT CURRENT SETTINGS. Press the Enter
button. The balance wil print current settings out to a printer. If a printer is not
connected or improperly connected, the balance will display PRINT FAILED
after displaying PRINTING.
SET BALANCE
PRINT CURRENT SETTINGS
7.9 Print current settings
When this option is selected, you may view all settings made in your balance on an external printer.