Xerox MAX 200 - Manual (Page 98)

96 Additional touch screen features
Image location
Introduction
The image location feature shifts the image up, down or to the right
in 1-mm increments up to 30 mm.
The image cannot be shifted to the left (the left arrow button is
always disabled). If you copy requires a left margin, shift the image
to the right.
Note: If needed, you can shift your original to the left by moving the
document guides, on the scanner.
Procedure
1. Select the additional feature group tab. If needed, refer to page
95.
2. Select the image location button, on the basic screen.
The image location screen is displayed.
3. Select the top or bottom arrow buttons to shift the image up or
down. If needed, select the 100 buttons to shift the image in
100 increments.
4. Select the right arrow button to shift the image to the right. If
needed, select the 100 button to shift the image in 100
increments.
Select clear to set the values to 0.
To cancel the changes and exit from this screen, select cancel.
5. Insert the document to make copies, or select done as required
to select additional features.
Ready to copy
Load documents face down Selected 01
Image Location Cancel Done
Clear
(0~999)
(0~999)
mm
mm
Doc. direction
0
0
100
100
100 100