Xerox MAX 200 - Manual (Page 179)

How to customize the MAX 200 177
How to change the system features (continued)
Auto power off
Introduction
The auto power off feature switches the machine power off, if the
machine is not used for a selected period of time. You set the time
period.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the system features tab.
3. Use the arrow buttons to select the auto power off feature.
4. Select open.
The auto power off screen is displayed.
5. Select the desired default time; No, 1 – 5 hours.
6. Select done to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select cancel.
7. To exit, press the custom presets button.
Custom Presets
3 Hours 1 Hour 2 Hours
4 Hours No 5 Hours
Cancel Done Auto Power Off
Select time (from end of last job) until power off.
Press [Custom Presets] to return to
Previous screen.
System features Copy features Storage/Disk
Manager
Open
Time &Date
Auto Power Off
Auto Power save
Auto Clear/ Backlight Off
Attention Tone
Plotter Setup
Loading Stamp Data