Xerox MAX 200 - Manual (Page 180)

178 How to customize the MAX 200
How to change the system features (continued)
Auto power save
Introduction
The auto power save feature reduces the machine power if the
machine is not used for a selected period of time. You set the time
period.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the system features tab.
3. Use the arrow buttons to select the power save feature.
4. Select open.
The auto power save screen is displayed.
5. Select the desired time; No, 1 – 30 minutes.
6. Select done to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select cancel.
7. To exit, press the custom presets button.
Press [Custom Presets] to return to
Previous screen.
System features Copy features Storage/Disk
Manager
Open
Time &Date
Auto Power Off
Auto Power save
Auto Clear/ Backlight Off
Attention Tone
Plotter Setup
Loading Stamp Data
Custom Presets
Cancel Done
Auto Power save
3 minutes 5 minutes
30 minutes 20 minutes 10 minutes No
1 minute
Select time (from end of last Copy Job)
until power save