Xerox MAX 200 - Manual (Page 45)

Media 43
Media
How to handle unusable documents
Torn or ripped document
1. Mend the torn portion by affixing tape on the reverse side.
2. If the lead edge is frayed, mend it with tape.
Document with staples
1. Remove the staples.
2. Mend the torn portion by affixing tape on the reverse side.
3. If the lead edge is frayed, mend it with tape.
Document with curl
1. Roll the document in reverse to straighten the curl.
2. If the curl cannot be straightened, fold the original document
once along the line about 20-30 mm from the lead edge, then
flatten the original document before copying it.
3. If media has excessive curl, do not use.
Bent document
Do not use creased, wrinkled, or excessively curled document.
Transparent document
Copy the transparent document, with it loaded in the document
carrier.