Xerox MAX 200 - Manual (Page 222)

220 How to customize the MAX 200
How to change the copy features (continued)
Background suppression level default
Introduction
The background suppression level default feature sets up the
default background suppression levels for variable (default 1) and
fixed (default 2), located on page 88.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the background suppression
level default feature.
4. Select open.
The background suppression level default screen is
displayed.
Press [Custom Presets] to return to
Previous screen.
Stamp Location and Orientation
Date Stamp Format
Folder Setup
Auto/ Manual Mode
Media Cut Mode and Document
Orientation
Lead/Trail Edge Default Synchro
Variable length default
Background Suppression Level Default
System features Copy features
Storage/Disk
Manager
Open