Xerox MAX 200 - Manual (Page 196)

194 How to customize the MAX 200
How to change the copy features
Reduce/enlarge presets
Introduction
The reduce/enlarge presets feature sets up the default reduce and
enlarge presets.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the reduce/enlarge presets
feature.
4. Select open.
The reduce/enlarge presets screen is displayed.
Press [Custom Presets] to return to
Previous screen.
Reduce/Enlarge Presets
Media Type and Width for Auto Mode
Stamp Location and Orientation
Date Stamp Format
Folder Setup
Auto/ Manual Mode
Media Cut Mode and Document Orientation
Lead/Trail Edge Default Synchro
System features Copy features
Storage/Disk
Manager
Open