Xerox MAX 200 - Manual (Page 41)

MAX 200 power 39
MAX 200 power
The Max 200 power chapter provides machine power information.
The following topics are discussed:
•
Switching the power-on
•
Switching the power off
•
Ground fault protectors
•
Warm-up
•
Auto power-off
•
Power save
Switching the power-on
Caution: Never switch off the printer or scanner when the printer is
in operation.
Note: This procedure is for the printer and scanner only. If your
system contains the folder or stacker, refer to their user guide for
power-on instructions.
1. Turn the key and open the printer circuit breaker
door.
2. Switch the printer circuit breaker to the on position
(up).
3. Close the printer circuit breaker door and turn the
key to lock the door.