Xerox MAX 200 - Manual (Page 241)

How to customize the MAX 200 239
How to change the storage/disk manager features
(continued)
Stamp creation/deletion (continued)
Stamp creation (continued)
10. If needed, select scanning setup. Else continue to step 13.
•
The scanning setup option allows you to modify the
background suppression, image density, or reduce and
enlarge the stamp pattern.
Note: A message is displayed if the stamp size exceeds
4900 mm
2
. If the end position measurements are greater than
4900 mm
2
(X2,Y2) you can reduce the size by changing the
X2,Y2 measurements or select the scanning setup option and
reduce the image size.
The scanning setup screen is displayed.
Done
Setting for R/E value, Copy density, and
Background suppression may be changed
Cancel Scanning Setup
Background
Suppression
Normal
Fixed
Image
Density
Red: Normal
Black: Normal
Specify R/E% for Stamp size
100.0%
64.7%
50.0%
25.0%
100.0%
+0.1
−
0.1
25.0% − 100.0%
Done
Ready to store image on floppy disk
Cancel Stamp Creation/Store
Enter Size of
Stamp Area on
Document to be
Scanned
Scanning
Setup
Scroll
Start Position
Stamp size
Position of Date
Position of Number
0
0
0
0
0
0
0
0