Xerox MAX 200 - Manual (Page 228)

226 How to customize the MAX 200
How to change the copy features (continued)
Color recognition range
Note: You do not want the color ranges to overlap. If you increase
the range on one color, be sure to decrease the range for the
adjacent color.
Introduction
The color recognition range feature allows you to adjust the color
range (in angles) the scanner uses to recognize a color.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the color recognition range
feature.
4. Select open.
The color recognition range screen is displayed.
Press [Custom Presets] to return to
Previous screen.
Folder Setup
Auto/Manual Mode
Media Cut Mode and Doc. Orientation
Lead/Trail Edge Default for Synchro
Background Suppression Level Default
Image Density
Scan to Print Color Default
Color Recognition Range
System features Copy features
Storage/Disk
Manager
Open