Xerox MAX 200 - Manual (Page 231)

How to customize the MAX 200 229
How to change the copy features (continued)
Marker area recognition
Introduction
The marker area recognition feature sets up the marker color
default the scanner recognizes. It also defines on how the scanner
recognizes the wide marker line on your document.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the marker area recognition
feature.
4. Select open.
The marker area recognition screen is displayed.
Press [Custom Presets] to return to
Previous screen.
Auto/Manual Mode
Media Cut Mode and Doc. Orientation
Lead/Trail Edge Default for Synchro
Background Suppression Level Default
Image Density
Scan to Print Color Default
Color Recognition Range
Marker Area Recognition
System features Copy features
Storage/Disk
Manager
Open