Xerox MAX 200 - Manual (Page 184)

182 How to customize the MAX 200
How to change the system features (continued)
Attention tone
Introduction
The attention tone feature sets up an audible tone to inform you of
certain machine conditions.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the system features tab.
3. Use the arrow buttons to select the attention tone feature.
4. Select open.
The attention tone screen is displayed.
5. Select the desired option; on or off.
Normal The machine beeps once when a button is pressed.
Alarm When an unavailable button is pressed, the machine
beeps twice
Ready to
copy When the warm-up cycle is complete, the machine
beeps.
6. Select done to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select cancel.
7. To exit, press the custom presets button.
Custom Presets
On On On
Off Off Off
Cancel Done Attention Tone
Normal Alarm Ready to copy
Press [Custom Presets] to return to
Previous screen.
System features Copy features Storage/Disk
Manager
Open
Time &Date
Auto Power Off
Auto Power save
Auto Clear/ Backlight Off
Attention Tone
Plotter Setup
Loading Stamp Data