Xerox MAX 200 - Manual (Page 188)

186 How to customize the MAX 200
How to change the system features (continued)
Plotter setup (continued)
Set delay time to copy mode
(continued)
6. Select the desired option; set delay or no delay.
If set delay is selected, select the desired time default; 30
seconds, 1, 3, 5, 7, 10 minutes.
7. Select done to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select cancel.
8. To exit, press the custom presets button.
30 seconds
Set Default Time to Copy
Mode Cancel Done
Custom Presets
10 minutes
1 minute 3 minutes
5 minutes 7 minutes
Select delay time before copy mode is active after
completing plotter jobs.
Set Delay
No Delay