Xerox MAX 200 - Manual (Page 216)

214 How to customize the MAX 200
How to change the copy features (continued)
Media cut mode and document orientation
Introduction
The media cut mode and document orientation feature sets up
the default cut for manual mode and the orientation default for
standard cut, located on page 80.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the media cut mode and
document orientation feature.
4. Select open.
The media cut mode and document orientation screen is
displayed.
Press [Custom Presets] to return to
Previous screen.
Reduce/Enlarge Presets
Media Type and Width for Auto Mode
Stamp Location and Orientation
Date Stamp Format
Folder Setup
Auto/ Manual Mode
Media Cut Mode and Document Orientation
Lead/Trail Edge Default Synchro
System features Copy features Storage/Disk
Manager
Open