Xerox MAX 200 - Manual (Page 36)

34 Getting to know the MAX 200
Manual feed panel
This section provides an overview of the manual feed panel
components.
Message On condition
Please wait When the machine is at a stop or the
machine has detected an error.
Remove media from
manual feed When the machine detects a media jam in
the insertion area of the manual feed tray.
Check printer control
panel The operator should check the printer control
panel.
Insert media (set
media type) When there is no media inserted at the start
of the manual feed copying.
Press start When the machine detects media inserted in
the manual feed tray.
Manual mode When making copies from the manual feed
tray.
Copy count When machine is making copies.
Button Function
Media type Press the media type button until the
desired media type is lit.
Selection is displayed in the (set media
type) window.
Start After media is inserted and the media type
is selected, press the start button to begin
the copy process.
Next document After making all copies of the current
document, press the next document
button, to copy the next scanned
document.