Xerox MAX 200 - Manual (Page 140)

138 Finishing touch screen features
Stamper (continued)
The screen below is the stamper screen. It is displayed when you
select the stamper button, on the finishing feature group tab.
The stamper screen contains five stamper features; stamp pattern,
numbering, stamp location, date stamp, and stamp color.
In order to enable the stamper features select the on button first.
The chart in this section, identifies each feature and provides a
description of each feature.
Feature Function
On Enable the stamper features.
Off Disables the stamper features.
Stamp pattern This feature allows you to select a stamp pattern,
print all stamp patterns, manually load stamp
patterns to memory, or delete all stamp patterns in
memory. Refer to page 139.
Numbering This feature creates the numbering stamp. You
can have a maximum of 12 characters in the
numbering stamp. Refer to page 141.
Stamp location This feature sets up the stamp location and
orientation to the preset values in custom presets.
Refer to page 147.
Date stamp This feature creates the date stamp. There are
two options available current and variable. Refer
to page 153.
Stamp color This feature prints the stamp pattern in red or
black. Refer to page 158.
Select Stamp number from
Stamp pattern screen Selected 01
Stamper Cancel Done
Stamp Color
On
Off
Stamp
Location
Stamp
Pattern
Date Stamp
Numbering
No. ?? No Print
Auto No Print Red