Xerox MAX 200 - Manual (Page 149)

Finishing touch screen features 147
Stamper (continued)
Stamp location
Introduction
The stamp location feature provides you with two methods to define
the stamp location and orientation, on your copies.
The auto method, automatically uses the preset values in custom
presets, on page 198.
The manual method allows you to set up the location and orientation
of the stamp pattern, on your copies.
Option Function
Manual The operator selects the start position of the stamp
pattern with X and Y coordinates and selects the
stamp orientation. Refer to page 147.
Auto The preset values in custom presets are used to
define the stamp location and orientation of the
stamp pattern. Refer to page 151.
For detailed information on how to setup the auto
settings in custom presets, refer to page 198.