Xerox MAX 200 - Manual (Page 67)

How to make copies 65
With the manual feed tray (continued)
5. Select nonstandard or standard.
Standard The number of standard sized documents that
can be scanned at one time depends on the
memory capacity and document size.
Nonstandard Only one nonstandard document can be
scanned at a time.
6. Insert each document in your document set into the scanner and
follow steps 5a or 5b, after each document is scanned.
a. If your scanned document requires any copy feature
changes, select the change setup button and go to step
14.
b. When all your documents have been scanned and there are
no required copy feature changes, select the done button.
Continue to the next step.
6. Open the manual feed tray.
Only one nonstandard
document may be loaded
for manual feed, regardless
of size Multiple standard
documents may be loaded
for manual feed, up to
available memory capacity
Nonstandard Standard
Cancel Done Manual Feed
Ready for manual feed (standard size)
Load documents face down
R/E: 100.0%
After loading all
documents, press [Done]
Change Setup Done
Manual Feed
Ready for manual feed (standard size)
Load documents face down
Press [Clear All] on panel to stop operation