Xerox MAX 200 - Manual (Page 214)

212 How to customize the MAX 200
How to change the copy features (continued)
Auto/manual mode
Introduction
The auto/manual mode feature sets up the default mode of
operation for the machine to auto mode or manual mode. It also sets
up the default media source tray for each mode of operation.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the auto/manual feature.
4. Select open.
The auto/manual mode screen is displayed.
Press [Custom Presets] to return to
Previous screen.
Reduce/Enlarge Presets
Media Type and Width for Auto Mode
Stamp Location and Orientation
Date Stamp Format
Folder Setup
Auto/ Manual Mode
Media Cut Mode and Document Orientation
Lead/Trail Edge Default Synchro
System features Copy features
Storage/Disk
Manager
Open
Custom Presets
Auto/Manual Mode
Auto Mode
Manual Mode
Roll 1
Roll 2
Roll 4
Tray 5
Roll 3
Cancel Done
Set Magnification
Default
Set Media Source Default