Xerox MAX 200 - Manual (Page 89)

Basic touch screen features 87
Image density
Introduction
The image density feature allows you to make adjustments to the
colors red and black on your copies. Each color can be adjusted
separately. Typically if the original is very light, you will want to
change the density too darker.
Procedure
1. Select the basic feature group tab. If needed, refer to page 68.
2. Select the image density button, on the basic screen.
The image density screen is displayed.
3. Adjust the black and red density levels to meet your specific
needs.
To increase density, select the down arrow. To decrease
density, select the up arrow. To return to normal, select the
normal button.
To cancel the changes and exit from this screen, select cancel.
4. Insert the document to make copies, or select done as required
to select additional features.
Ready to copy
Load documents face down Selected 01
Image Density Cancel Done
Normal Normal
Lighter
Darker
Black Red