Assign] area – Panasonic WR-DA7 User Manual

Page 91

C h a p t e r 5

D A 7 U s e r s ’ G u i d e

Channels,

Library

, & Meters

Pan Adjustment for a Selected Channel

Adjust the pan for a selected channel by selecting the pan soft knob with
the cursor, and turning the

JogDial. Or, turn the Pan knob in the

PAN/SURROUND area.

Pan Adjustment of an Adjacent Channel

When

is active, the knob for the odd-numbered channels appears

on the left of the area, and the knob for the even-numbered channels
appears on the right.

Cursor to a soft knob, and turn the

JogDial. A pan value appears in the

data field.

Stereo Balance Adjustment

Cursor to a balance soft knob, and turn the

JogDial. When [STEREO] is

, the balance soft knob is visible.

See Chapter 8 for more information on Pan/Assign, Surround, Bus Assign.

[ASSIGN] Area

The bus assign off or on switching will send the selected channel to

BUS 1-

8, MASTER L/R, or DIRECT (DIRECT works exclusively with the D-I/O
card). To select a bus assignment, cursor to

the , , , , , , , ,

, or

button in the bus assign area, and press the

ENTER button. The

selected bus assignment will toggle and become highlighted. Multiple bus
assignments can be selected for a channel.

To disable or enable the surround sound function, cursor to the

button,

and press the

ENTER button. When the surround function is enabled,

assignment to buses 1 through 6 is automatically activated.

The channels set to stereo are assigned to buses in odd/even order. The
[ASSIGN] area will show the new assignment mode. When the channels are
set for stereo assign to

, the odd-numbered channels are left and the even-

numbered channels are right.

SUR

GNG

[ASSIGN] Area