Panasonic WR-DA7 - Manual (Page 172)

Operator Title Input
Cursor to the button, and press the ENTER button to set the edit mode.
(Remote operation is not allowed in the edit mode.) Cursor to the [TITLE] of
the relevant operator, and press the ENTER button. The Name Edit Window
appears. Input the title.
See Section 5-3 Library Windows, for more information on the [Name
Edit Window] for title input operations.
[COMMAND MODE] Area
From this area you can switch the modes between control change and free
definition. Press the
button to select the control change mode.
Press the button to select the user definition mode.
Button
Indicate and set a control change number.
Button
Edit transmission data for the buttons, switches, knobs, and faders in the
user definition mode.
[SW STS] Area
Switch the status of the buttons which are applied to the selected
user definition mode.
When the selection is [SOLO] or [ON], two messages for each
status, on and off, must be edited. When this is done, select
or in
the [SW STS] area.
Data Row Input Part
Here you can input MIDI exclusive messages to transmit.
This row appears if [FREE DEF] is selected.
OFF
ON
C h a p t e r 1 1
D A 7 U s e r s ’ G u i d e 11 - 1 8
11
MIDI