Panasonic WR-DA7 User Manual

Page 240

This selection determines whether the motorized faders are active or
not. When this selection is off, automation will still play back and on
the

TopPanel a LED button in the FADER LAYER Selection

section will blink if selected.

This selection determines whether the

TALK BACK button on the

Top Panel is set to a momentary or locked position. In momentary,
the button only operates when it is continually pressed. In locked
mode, once pressed, the

TALK BACK button will stay on until

pressed again.

This button makes the DA7 match the polarity of the remote
switch connected to DA7's Rear Panel. Cursor to this button, and
press the

ENTER button to activate, if a Closed type switch is

normally used. The default setting to the button is inactive and
matches a normally Open type switch.

When this selection is on, if the sync of the master wordclock
becomes unlocked, a warning message is displayed.

When this selection is on, pressing

Keypad numbers sends a MIDI

program change message and recalls a scene memory from 00-50
corresponding to the numbers entered.

When this selection is on, a confirmation message is displayed when
a library or scene memory is saved via the

button.

If this selection is on, a confirmation message is displayed when a
library, scene memory, or automation data is recalled.

This selection is unassigned and is for future use and applications.

C h a p t e r 1 6

D A 7 U s e r s ’ G u i d e

1 0

Utility