Panasonic WR-DA7 - Manual (Page 179)

When the DA7 is the last device in a wordclock chain, the termination switch
must be on. In the
[D-I/O>INPUT SET] window, cursor to the , and
press the ENTER button.
When the DA7 is connected between devices, the wordclock termination
switch must be off. A wordclock signal will pass through the mixer, relaying
the signal to the next device in the chain. The
button must be
selected when the DA7 is relaying the wordclock reference.
The input and output wordclock signal specifications are provided in the
Appendix F, Technical Specifications.
Button
Select this button when an external clock reference will be used to slave
the DA7. Cursor to the button, and press the
ENTER button. The button
will appear as inverse video when engaged.
C h a p t e r 1 2
D A 7 U s e r s ’ G u i d e 12 - 4
12
D-I/O
WORD CLOCK GENERATOR BLOCK GRAPHIC
CLOCK
GENERATOR
BLOCK ON
OFF
ON
WORDCLOCK IN
WORDCLOCK OUT
Clock terminating
switch 75
Ω on/off
OFF