Panasonic WR-DA7 - Manual (Page 118)

Button
Activating this button stores the current EQ settings into one of the fifty
memories. The
[NAME EDITOR] window pops up, prompting you to name
the new preset. After naming it, scroll to the button, and press the
ENTER button. The MEMORY numeric readout will flash for two seconds,
indicating that you have written to the memory. The library comes with all
presets named
INITIAL *.
Button
Activating this button initializes the current memory to the factory settings.
When cursoring to this button, you should be asking yourself if you have
“backed-up” your current memory.
Button
Activating this button opens up the [NAME EDITOR] window, prompting
you to name the new memory. After naming it, scroll to the button in
the [NAME EDITOR] window, and press the ENTER button. The MEMORY
numeric readout will flash for two seconds, indicating that you have written
to that memory location.
Button
Select this button, and press the ENTER button to protect the current
memory from being cleared or over-written.
Library selections are made when the cursor is within the [Library Data] area
by rotating the JogDial. Rotating it clockwise moves the cursor through the
library numbers from low to high (1-50), while turning it counter-clockwise
moves through the library from high to low (50-1).
C h a p t e r 7
D A 7 U s e r s ’ G u i d e 7 - 9
7
Equalizer
Name Editor Window