Writing a scene memory, Input of scene memory title, Setting of read protection channel – Panasonic WR-DA7 User Manual

Page 229

Writing a Scene Memory

Writing a Scene Memory uses the same procedure as

READ. Select a memory

file number, move the cursor to the

button, and press the

ENTER

button. The

[MEMORY] display will flash for five seconds, indicating that the

settings have been written to the selected Scene Memory.

Input of Scene Memory Title

Press the

ENTER button, when the cursor is over the

button, and the

[NAME EDITOR] window will appear over the [RD/WR] window. Alpha-
numeric characters can be input from the

Keypad or the keyboard in the

[NAME EDITOR] window.

Setting of Read Protection Channel

To activate read protection to a selected channel or all channels, cursor down
to the

[PROTECT CHANNEL SELECT] area in the window. If the

button is selected and activated, nothing from the Scene Memory can be
recalled into the system.

If you prefer to protect only a select group of channels, scroll through the
channel numbers, and press the

ENTER button on your choice.

In the

[READ PARAMETER] area there are several parameters that can be

programmed on or off selectively, or collectively.

C h a p t e r 1 5

D A 7 U s e r s ’ G u i d e

Scene

Memory