Channel fader strip – Panasonic WR-DA7 User Manual

Page 27

Channel Fader Strip

There are sixteen Channel Fader Strips on the DA7. The functionality of each
Channel Fader Strip is determined by which of the four

Fader Layer

controls selected:

INPUT 1-16, INPUT 17-32, AUX/BUS, and a user

CUSTOM/MIDI function.

The

MIC/LINE INPUT knob varies the channel input gain volume and adjusts

for either a mic or line-level input. Due to the high quality design of this
circuit, there is no pad switch necessary; the input knob range sets the input
level. This knob only affects the analog inputs 1-16.

The

PEAK/SIGNAL LED indicates when an input signal is present

(green),

and when the input signal level is too high (red).

The LED field indicators reflect the auxiliary (

AUX) routing assignments and

automation parameters. The LED color signifies the

AUTOMATION/AUX

button selection,

AUX (green), or AUTOMATION (red).

The

SOLO LED button toggles on (red) or off. When on, the channel output

will be routed to the

MONITOR A speakers (overriding the MONITOR A

input), and to the headphones.

The

FLIP LED button flips the control of the Channel Fader Strip from one

input layer to the other. The LED color indicates the current input selection
and matches the

Fader Layer control LED button colors, INPUTS 1-16

(green) or

INPUTS 17-32 (red).

C h a p t e r 2

D A 7 U s e r s ’ G u i d e

DA7 T

our

Fader

MIC/LINE INPUT knob

PEAK/SIGNAL LED

LED field indicators for AUX 1-6, and
automation parameters, CH, EQ,
PANASSIGN/SURR, LIBRARY and SEL/MAN

SOLO LED button

FLIP LED button

SELECT LED button

On LED button

Channel Fader Strip

Channel numbers

AUX/BUS Layer

function