Phase [ph] area, Gain] area, Aux send] area ([aux1] to [aux6]) – Panasonic WR-DA7 User Manual

Page 86

Phase

[PH] Area

The phase normal and the invert function switches the signal phase of the
selected channel. Cursor to the

(normal) button, and press the

ENTER

button to invert the signal. The

button will toggle to

(invert).

[GAIN] Area

By using the

JogDial, gain or trim can be added to the selected channel.

This should be considered as an additional gain stage. Cursor to the soft knob,
and rotate the

JogDial to either boost or cut the level of the selected source.

The

[GAIN] value is displayed in the field below the soft knob. The

adjustable range is -24dB to 12dB.

[AUX SEND] Area ([AUX1] to [AUX6])

This area of the window is displayed when a channel with aux send
capability is selected. Use the

ARROW buttons and the JogDial to

navigate to the various elements in the window area. The

(post-fader) and

(pre-fader) buttons are toggled by pressing the

ENTER button, after

selecting them with the cursor. The

and

buttons are also toggled by

selecting them with the cursor and pressing the

ENTER button.

[AUX SEND] level soft knob can be adjusted by rotating the JogDial,

after selecting it with the cursor. Rotate the

JogDial clockwise to increase the

gain or counter clockwise to decrease it. The level value is displayed in the
field below the level soft knob. The level range is -

∞

to +10db.

Alternatively, selections made with the Top Panel

AUX section controls will

update the

[AUX SEND] window area.

When a selected channel is set for mono and a target aux is set
for stereo, cursor to the soft knob, and turn the

JogDial. A pan

value appears in the data field from

L16 - C -R16.

When a selected channel is set for stereo and a target aux is set
for stereo, cursor to the soft knob, and turn the

JogDial. A

balance value appears in the data field from

L16 - C -R16.

OFF

PRE

PST

INV

NOR

C h a p t e r 5

D A 7 U s e r s ’ G u i d e

Channels,

Library

&Meters

[AUX SEND] Area ([AUX1] to [AUX6])